Polypropylene sheet

 Polythene sheet.

Polythene sheet for use as a dpc should be black, low density polythene sheet of single thickness not less than 0.46 mm, weighing approximately 0.48 kg/m^2. Polythene sheet is flexible, can withstand distortion due to moderate settlement in a wall without damage and is an effective barrier against moisture. It is laid on an even bed of mortar and lapped at least the width of the dpc at running joints and intersections. Being a thin sheet material, polythene makes a thinner mortar joint than bitumen dpc, and is sometimes preferred for that reason.

Its disadvantage as a dpc is that it is fairly readily damaged by sharp particles in mortar or the coarse edges of brick.

Related Posts by Category:

Polythene

• Polymer-based sheets.

Materials

• Resistance to the passage of sound - Materials construction.
• Semi-rigid damp-proof courses - Mastic asphalt.
• Polymer-based sheets.
• Bitumen damp-proof course.
• Copper.
• Flexible dpcs Lead.
• Material for damp-proof courses above ground.
• Materials for underfloor insulation.
• Mastic asphalt or pitch mastic.
• Bitumen sheet.
• Bitumen solution, bitumen/ rubber emulsion or tar/rubber emulsion.
• Hot pitch or bitumen.
• Polythene and polyethylene sheet.
• Materials for damp-proof membrane.
• Proportioning materials.
• Blinding.
• Brick of tile rubble, Concrete rubble, Gravel and crushed hard rock, Chalk.
• Hardcore - Name given to the infill of materials.